BotonAir Industrial Electrostatic Purification System called ESP for short utilizes high voltage electrostatic field technology to purify the exhaust produced by different kind of PVC plastic factories, such as PVC gloves, PVC synthetic leather, PVC wallpaper, PVC floor mat etc.
Foshan Boton Air Technology Co., Ltd is a professional manufacturer in Electrostatic Fume Treatment Equipment. We are committed to design and manufacture PVC synthetic leather smoke removal system products which enhance industrial air pollution control and achieve good performance and try to provide you with perfect solution for factory exhaust gas disposal problems.
Our ESP filter utilizes high voltage electrostatic ionization technology. The industrial smoke is sucked into PVC synthetic leather smoke removal system by the fan and some of the large oil & mist particles are trapped on the pre-filter/air divider. When the airflow enters the high-voltage electrostatic cells, with the action of the high-voltage electrostatic ionization, the exhaust gas is ionized and the grease particles is charged. Then charged particles are adsorbed on the anode electric field(tubes) and flow to bottom under the action of their own gravity then are discharged through the oil drain. The remaining micron-sized oil mist is decomposed into carbon dioxide and water by the electric field and finally discharge the clean air. At the same time, due to the function of the high voltage electrostatic ionization, ozone is generated which helps to remove most of the odor in the smoke.
1. The innovative technology of separating control panel with the host, avoids
vapor, oil, mist and other pollutants into control panel. Using frequency load Power
makes the output more stable, efficiency higher and the life cycle longer.
2. The instant display function can show the running status of the equipment at any time.
3. Discharge protection, short circuit protection, arc suppressing protection and other function improve the safety for use.
4. The intelligent fire detection system ensures the equipment detection safe.
5. With functions of one-click start and stop, this simple control design makes the operation and maintenance easier and more convenient
Particle Size: Collects particles as small as 0.01 microns
Air Flow Direction: Left to Right/Right to Left
Safety: Auto-stop when electro-discharge 8-12times and with fire protection system
Filter Cell: Stainless Steel
Pre-Filter: Washable Perforated Steel Plate
Input Voltage: 384V 50/60Hz
Ionizing Voltage: 16~18 KV DC
Installation: Indoor installation or outdoor installation